SureCall | www.surecall.com | 1-888-365-6283 | [email protected]
5
Step 1: Mount Outside Antenna
Place the magnetic-mount antenna on the top of your vehicle, preferably toward the back, maximiz-
ing the distance from planned location of the inside patch antenna. Ensure that the antenna has at
least a 12-inch radius clear of obstructions and other radiating elements, such as a radio antenna.
Next, run the cable from the outside antenna across the car’s roof and into the car. To hide and pro-
tect the antenna cable, carefully pull down the door seal, run cable underneath it and push the seal
back into place. Run the cable to the inside of the vehicle near the planned location of the booster
(under the seat of the vehicle, or in the front or middle console).
Note: The outside antenna must not be collocated or operating with any other antenna or booster.
Step 2. Install the Inside Patch Antenna
Identify a location for the inside antenna on or near your front dashboard that is
1. Within 2-3 feet of the typical cell phone location
2. At least 8 inches (20cm) from cellular devices and
3. At least 4 inches (10cm) from metal
Next, peel Velcro backing and apply to a clean dry surface
in your chosen location.
Or try this - Use the free vent clip provided with your
product as a mounting surface then simply clip to an
air vent.
Installation