SureCall CA-VAT-100 User Manual Download Page 15

15

Limitations of Warranty, Damages and Liability:

EXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUAR-

ANTEES, OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR-

POSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS, WHETHER 

EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING.

SURECALL AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, 

IF ANY, RECEIVED BY CELLPHONE-MATE, INC. FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED 

OR TO BE FURNISHED, AS THE CASE MAY BE, WHICH IS THE SUBJECT OF CLAIM OR DISPUTE. IN 

NO EVENT SHALL SURECALL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAG-

ES, HOWSOEVER CAUSED. 

All matters regarding this warranty shall be interpreted in accordance with the laws of the State of California, and any 

controversy that cannot be settled directly shall be settled by arbitration in California in accordance with the rules 

then prevailing of the American Arbitration Association, and judgment upon the award rendered may be entered in 

any court having jurisdiction thereof. If one or more provisions provided herein are held to be invalid or unenforce-

able under applicable law, then such provision shall be ineffective and excluded to the extent of such invalidity or 

unenforceability without affecting in any way the remaining provisions hereof.

WARNING: E911 location information may not be provided or may be inaccurate for calls served BY 

USING THIS DEVICE.

48346 Milmont Drive

Fremont, California 94538

USA

888.365.6283

Fax: 510.996.7250

www.surecall.com

SureCall has made a good faith effort to ensure the accuracy of the information in this document and disclaims the 

implied warranties of merchantability and fitness for a particular purpose and makes no express warranties, except 

as may be stated in its written agreement with and for its customers.SureCall shall not be held liable to anyone for 

any indirect, special or consequential damages due to omissions or errors. The information and specifications in 

this document are subject to change without notice. © 2014. All Rights Reserved. All trademarks and registered 

trademarks are the property of their respective owners.

Summary of Contents for CA-VAT-100

















Reviews: