SLC-TRQ4 manual v1.1
5
.
SETUP – A LIITLE MORE IN THE DETAILS
Measuring modes:
Continuous – records all measuring points
from start to stop
Result: maximum value.
This mode is ideal for monitoring longer
procedures with several peaks as chuck
torque testing
Single peak – Measurement stops
automatic after the 1
st
peak.
Result: maximum value
This mode is ideal for monitoring short
procedures with only 1 peak as cap
release torque testing
Double peaks – Measurement stops
automatic after the 2
nd
peak.
Results: Max1, Max2
This mode is ideal for monitoring short
Multiple peaks – Records only the
maximum values of the test cycles – 1 test
cycle is represented by 1 point on the
diagram. This test is generally used for
