Attach small & big extension
tubes (P5) with backboard (P3)
back support (P4) using nut &
bolt (G-153×10mm) and tighten
it with the help of two spanners.
STEP-9
Round tube (I-44×12mm)
between
back support (P4)
Insert internal tube pipe to the tension bar (P8). Make sure that
the spring rod hole match to hole of extension bar pipe (P8).
STEP-10
Attach top side of tension bar (P8) with big extension tube (P5)
using nut & bolt (F-110×8mm).
STEP-11
Round tube (J)
between
extension
tube
(P5- 30×12mm)
& tension
bar (P8)
STEP-12
Attach bottom side
of tension bar (P8)
with middle pole
clip using nut &
bolt (D- 50×8 mm)
and tighten it
with the help of two spanners.
Page-6
