background image

WARRANTY

Warranty shall apply to the original purchaser at the original installation point only.

All logs are guaranteed for three years against manufacturer's defects. 

The burner assembly system is guaranteed for a period of (3) years from the date of purchase and will be
replaced for freight costs only.

Safety Pilot, valves and thermocouples are guaranteed for a period of one (1) year under the original 
manufacturers warranty.

General Warranty:

This warranty does not apply in the case of improper installation, neglect, accident, 

misuse or as a result of modifications of the original product.

All costs for removal and re-installation are the expressed responsibility of the purchaser.

For repair, replacement, or service to defective part/parts please contact our Customer Service Hotline, number 
below. Thereafter with valid warranty registration and proof of purchase, call the Customer Service Hotline for 
authorization to ship defective part prepaid and insured in original carton to Sure Heat Manufacturing, 
1861 West Oak Parkway, Marietta, GA 30062. Goods returned improperly packaged are the sole responsibility 
of purchaser.

It is agreed that any repair or replacement is the exclusive remedy from Sure Heat Manufacturing. In no case 
shall Sure Heat be liable for any consequential damage or breach of this or any other warranty expressed or 
implied whatsoever. This limitation as to consequential damages shall not apply in states where prohibited.

Purchased From:____________________________________________

Date:_________________

Size:  

 

24”

Model:

Name:_________________________________________________ Phone: (____)_____________________

Address:________________________________________________________________________________

City:___________________________________________ State: _____  Zip: __________________________

Please photocopy and return to Sure Heat within 14 days of purchase.

If you have other questions, please contact our 

Customer Service Hotline (800) 229-5647.

Page 11

RMH-130-00531

August 2007

Summary of Contents for VMR24LP












Reviews: