background image

12

MAINTENANCE OF THE SYSTEM

Under normal use, this appliance will require only limited cleaning. Constant air flow through this appliance will cause
dust to collect on the burners, base and logs. An excessive build-up of dust can cause the pilot and burners to operate
incorrectly and produce high levels of carbon monoxide, a poisonous gas. This unit should be cleaned about once a
month.

To clean the burner and base, turn the heater OFF and allow the system to cool down. Remove top logs and bottom logs
very carefully. Vacuum or brush away all dust and lint from the system. Do not use any cleaning fluids to clean the logs
or any other part of the appliance.

Replace the logs in their proper position and relight the pilot. At least once a year, the log set and all gas piping should
be checked by a qualified service person.

WARNING

When used without fresh air, appliance may give off 

carbon monoxide

, an odorless, poisonous gas.

OPEN WINDOW AN INCH OR TWO FOR FRESH AIR WHEN USING APPLIANCE

This appliance has a Pilot Light Safety System that turns the appliance off if there is not enough fresh air available.

DO NOT TAMPER WITH THE PILOT LIGHT SAFETY SYSTEM

If appliance shuts off, do not relight until you provide fresh air. If appliance continues to shut off, have it serviced by a
qualified technician. Keep burner and control compartment clean.

CARBON MONOXIDE POISONING MAY LEAD TO DEATH

Early signs of carbon monoxide poisoning resemble the flue, with headache, dizziness and/or nausea. If you experience
any of these symptoms, appliance may not be working properly.

Get fresh air at once!

Have appliance serviced by a

qualified service technician.

Some individuals, pregnant woman, persons with heart or lung disorders, anemia, those under the influence of alcohol
or those at high altitudes are more likely to be affected by carbon monoxide than others.

Due to high temperatures, this appliance must be located out of traffic and away from furniture and draperies.

Adults and especially children should be alerted to the hazard of high surface temperatures and should be kept away to
avoid burns or clothing ignition.

Young children should be carefully supervised when in the same room as the appliance.

Any safety screen or guard removed for servicing the appliance must be replaced prior to operating the appliance.

Do not place clothing or other flammable material on or near the appliance.

Installation and repair should only be performed by a qualified service technician.

The appliance should be inspected before use and at least once a year by a qualified service technician.

More frequent cleaning may be required due to excessive lint from some carpeting, bedding or other materials. It is
imperative that control compartments, burners and circulating air passageways of this appliance be kept clean.

WARNING:

Do not allow fans to blow directly into the fireplace. Avoid any drafts that alter burner flame patterns.

WARNING:

Do not use a blower insert, heat exchanger insert of other accessories not approved for use with this heater.

WARNING:

Any change to this appliance or its controls can be dangerous.

Summary of Contents for SCVFMR18
















Reviews: