Copyright © 2021 Sure Electronics Co., Ltd.
Program Writing
To write program into ADAU1701, please do as follows.
Enter “Hardware Configure” page and
right-
click the “ADAU1701”, then select “Write Latest Compilation
to E2PBOM” to download the program (see figure 4). you will see a prompt window, choose the “I2C” on
the right and click “OK” (see figure 5).
Figure 4
Figure 5
If it shows “Design Mode” in the lower right corner, you need to click “Link Compile Download” at first.
When it shows “Active: Compiled”, you can move on to write program into ADAU1701.