Hardware Detail
©
2004-2011 Sure Electronics Inc
AA-AB32191_Ver1.0_Page 6
FIGURE 2-3 OUTPUT CONNECTION
TABLE 2-3 OUTPUT CONNECTION
Connector Mark
Description
J5
Negative Output of Channel 1
J2
Positive Output of Channel 1
J9
Negative Output of Channel 2
Banana Connectors
J6
Positive Output of Channel 2
J3
Output of Channel 1
Terminal blocks*
J7
Output of Channel 2
Note:
1.
Never connect more than one group of speaker to the audio output
2.
Never connect CH1_OUT-
、
CH2_OUT- together since they belong to different
NETs.
3.
Refer to on-board descriptions for connection details.
4. Both positive and negative speaker outputs are floating and may not be
connected to ground (e.g., through an oscilloscope).
2.4 LED Indicators
This amplifier has two LED indicators which is marked as “PWR (D4)” and “125 degree
C (D2) “. “Power (D4)” will be illuminated in green when power-up. “125 degree C
(D2)“ will be illuminated once the temperature of TAS5630 reaches up to 125 degrees
centigrade, at the same time the fan speeds up.
