④
Short press 3 times in a row: ASR is turned on, and locked in current state; switching
between active and disable.
If you short press 3 times again, ASR will be turned off.
⑴
ASR level setting key: also
Switch setting button R\S
, located in front of the right-hand handle
switch, trigger switch. When the dashboard in the normal condition, the
R/S
button can switch between
ASR setting level.
①
Short press once: display the current ASR setting level;
②
quick short press twice: The ASR setting will be leveled up and display on the dashboard;
keep press
R/S
button will made the ASR level cyclically between display A1
～
A3, please refer to
page 5.4 for the specific setting method.
C.
Parking brake
When parking on a slope,
apply the locking brake
to prevent the motorcycle from slipping. For
instructions and operations, please refer to page 6.4 of "Feature Introduction"
。
D.Turbo Switch
The Turbo switch is the red button on the left handle switch.
When the electric motorcycle is in
the sport mode, press the Turbo switch and the electric motorcycle will instantly output the
maximum power.
The Turbo mode is only valid in the sport mode, follow " One full throttle,
limited activate time, limited interval time" principle.
Specifically, When the motorcycle is in the sports mode and the electric motorcycle met the
operating conditions of Turbo mode, the Turbo mode indicator on the dashboard will stay on.
Press the Turbo mode switch and the Turbo mode is triggered, and the Turbo mode indicator
on the dashboard will flashing slowly. When Turbo mode activated for a certain period of time
(about 10 seconds), the Turbo mode indicator will flash rapidly, and the controller will
automatically exit Turbo mode after another 10 seconds, then the Turbo mode indicator goes
out, and back to normal operation condition. It will take about another 10 seconds to reboot,
and re-use the Turbo mode again.
E.
Headlight high/low beam switch
When the switch is pressed, the headlight changes from low beam to high beam. It remains in
the selected position until it is switched back. When in the high beam position, the high beam
indicator on the
dashboad
lights up.
F. Horn button
When the Key switch is in the ON position, the horn will make a sound when the button is
pressed. The electric motorcycle is very quiet
when riding, and the horn can be used to warn
pedestrians or other motorists present.
G. Turn indicator switch
When you push the Turn indicator switch to the left or right, the corresponding front and rear
Turn indicators will flash. When the Turn indicator light switch is turned on, the Turn indicator
light is on.
