Supvan TP76E Manual Download

Page: 46 / 58

SUPVAN

Chapter 5 Operation of Function Key

Select Sy , input number 1-8,you can select different symbols
Note:



En: English Input method.



Sy: Special symbol Input method.

5.28

【

Backspace

】

This function is to delete characters in front of the cursor.
Move the cursor to the back of characters to be deleted. Press

【

Backspace

】

to delete characters in front of cursor.
Press

【

Backspace

】

and hold to delete all characters in the segment. But the

SEQ of segment cannot be deleted. Any blank segment generated in the

process will not be printed.
If delete any segment, press

【

Delete Seg

】

Note:



Any character will not be restored after being deleted.

5.29

【

→

】

【

←

】

This function is to move the position of cursor or carry out other function

options.

5.30

【

↑

】

【

↓

】

This function is to move the cursor among segments or carry out other function

options.

5.31

【

Shift

】

This is the Shift key.

5.32

【

Test

】

This function is to test the print effect of tube printer.

Because of environment temperature difference or media material

difference, the actual printing segment length may be different from the

setting segment length.

This function is useful when there is a large difference between the actual

printing segment length and setting segment length.

Summary of Contents for TP76E



























































Search results

Summary of Contents for TP76E

Reviews:

Related manuals for TP76E

Brands by name

Popular brands

Supvan TP76E, Manual

Search results

Summary of Contents for TP76E

Reviews:

Related manuals for TP76E

Brands by name

Popular brands