G-
H
-
M
G -
C
D
E
F
G
H
I
D
E
F
G
H
I
15°
3°
Pedestal
The Second Step: Install the Wall Piece
Place the pedestal against the wall, mark off the holes then drill.
Insert plastic anchors into each hole,secure pedestal with self-drilling screw
as shown in the diagram
A-Plastic Anchors
B-Self-Drilling Screw
Use Screw Package 2
The Third Step:
Connection of Inner Pole Connector and Outer Pole
The Fourth Step:
Connection of Faceplate and Junction Plate
F-M8 Nut
8*45 Screw
8 Washer
Use Screw Package 1
Use Screw Package 1
Plastic knobs
I-M8 Self - Locking
Nut*2
8 Washer
The Fifth Step:Install the Hook And Display
The Sixth Step:Install the Hook And Faceplate
Use Screw Package 2
Use Screw Package 2
no washer if use the screw D
no washer if use the screw D
no spacer with the flat back
spacer needed with curved back
or
or
Hang the two hooks
into the faceplate
Tighten the bottom
screw,and stand up
the bottom of the faceplate.
Unscrew the plastic knob,
faceplate can be adjusted up and down,
adjust to the appropriate position and tighten again
Plastic
knobs
Please check the screws is fixed or not every two months .