2.
Anatomy and Usage
2.1
Front Panel
IN
Instrument input for the amplifier.
VOL
Controls the volume level of Channel 1.
TONE
The TONE control for Channel 1 is a passive Treble / Bass filter.
Turning the
knob clockwise decreases bass response, while increasing treble. Turning the knob
counterclockwise decreases treble response, while increasing bass frequencies.
VERB KNOB & LED
Controls the amount of Reverb in the signal path. The LED indicates the status of
the Reverb. The Reverb can be assigned to Channel 1, Channel 2 or BOTH, via a
switch on the rear panel.
Note: Reverb is active when LED is lit.
CH1 LED
Lights when Channel 1 is active.
CHANNEL SWITCH
Selects Channel 1 or Channel 2.
CH2 LED
Lights when Channel 2 is active.
BOOST SWITCH & LED
The Switch activates the Boost function. The BOOST function is on when the switch
is in the up position.
Boost is active when LED is lit.
LOOP LED
Shows the status of the Effects Loop:
Note: Loop is active when LED is lit.
GAIN
Controls the Gain of Channel 2.
MASTER
Controls the volume of Channel 2.
TREB
Controls the level of treble frequencies of Channel 2.
3
