![SUPREME FACTORY-BUILT FIREPLACE Owner'S Manual Download Page 13](http://html.mh-extra.com/html/supreme/factory-built-fireplace/factory-built-fireplace_owners-manual_1406372013.webp)
Model: Supreme Plus
Revised, August 2008
13
Figure 20
Figure 19
Door assembly:
1. Door frame
2. Glass
3. Glass gasket
4. Glass supports
5. Door gasket
Figure 18
REMOVAL OF ASHES
Regularly empty out the ashtray. The removal of the ashes should be done when the fireplace is cold.
To empty the ashtray:
1. Push down the ashes through the openings of the floor plate so that they fall into the ashtray. Do not overfill the ashtray.
2. Pull down the lower louver
3. Open the ashtray door.
4. Remove the ashtray.
5. Empty the ashes into a metal container.
6. Re-place the ashtray and close the ashtray door.
7. Close the lower louver.
Disposal of Ashes
Ashes should be placed in a metal container with a tight-fitting lid,
taken outside and placed on the ground, well away from all
combustible materials and pending final disposal. The ashes should
be retained in a closed container until they have cooled before
disposing of them.
WARNINGS:
•
Even if the fireplace has not been in use for two days, the ashes
can still contain hot embers.
•
Since the ashtray and the container can become very hot, wear gloves to avoid burns.
•
Never operate the fireplace with the ashtray door open.
•
Inspect regularly the ashtray door gasket and replace it if necessary.
•
Never operate the fireplace with the ashtray door gasket worn-out or damaged.
GLASS DOOR
The glass door of your fireplace must be treated with
care, do not slam the doors shut or build the fire too
close to the glass. Do not overfire. Excessive
temperatures or impacts may lead to breakage.
The glass panel is a heat-resistant ceramic type, 5 mm
thick.
Replace immediately a cracked or broken glass.
Do not use the fireplace with cracked or broken glass;
doing so may result in a fire hazard.
2
3
4
1
5