2
Installation
2-1 System Configuration
Select Suprema devices can use the Lift I/O expansion module to control access to
specific floors. All settings are programmed using the BioStar SE software and then
independently controlled by the master device.
(See the BioStar Manual for more details)
2-2 Power Connection
Use the following diagram to aid in powering the Lift I/O.
Recommended Power Supply:
-
12V
±
10%, greater than
500mA
per Lift I/O.
-
Compliance with standard IEC/EN 60950-1
-
When sharing power with other devices, use a power supply the correct cumulative current rating.
DC 12V Power Source
DC 12V Positive (+)
DC 12V Negative (-)
TCP/IP
RS-485
Floor Selection
Panel
Lift Controller
Up to 10 Lift I/O
Elevator
BioStar SE
5
