12
Installation
Tamper Connection
If Input Module is detached from the installed location due to an external factor, it can trigger an alarm or save an event
log.
Tamper
Using the Input Module with the enclosure
The Input Module can be installed inside the enclosure (ENCR-10) for physical and electrical protection. The enclosure
includes a power status LED board, power distribution board, power supply, and tamper. The enclosure is sold
separately.
Securing the battery
Insert the battery velcro strap into the enclosure and secure the battery.
•
Use a backup battery with 12 VDC and 7 Ah or higher. This product was tested with 'ES7-12' battery of
'ROCKET'. It is recommended to use a battery corresponding to 'ES7-12'.
