background image

15

Appendic

es

Appendices

Disclaimers

• 

Information in this document is provided in connection with Suprema products.

• 

The right to use is acknowledged only for Suprema products included in the terms and conditions of use or sale for 

such products guaranteed by Suprema. No license, express or implied, by estoppel or otherwise, to any intellectual 

property is granted by this document.

• 

Except as expressly stated in an agreement between you and Suprema, Suprema assumes no liability whatsoever, 

and Suprema disclaims all warranties, express or implied including, without limitation, relating to fitness for a 

particular purpose, merchantability, or noninfringement.

• 

All warranties are VOID if Suprema products have been: 1) improperly installed or where the serial numbers, 

warranty date or quality assurance decals on the hardware are altered or removed; 2) used in a manner other than 

as authorized by Suprema; 3) modified, altered, or repaired by a party other than Suprema or a party authorized by 

Suprema; or 4) operated or maintained in unsuitable environmental conditions.

• 

Suprema products are not intended for use in medical, lifesaving, life-sustaining applications, or other applications in 

which the failure of the Suprema product could create a situation where personal injury or death may occur. Should 

you purchase or use Suprema products for any such unintended or unauthorized application, you shall indemnify and 

hold Suprema and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, 

damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal 

injury or death associated with such unintended or unauthorized use, even if such claim alleges that Suprema was 

negligent regarding the design or manufacture of the part.

• 

Suprema reserves the right to make changes to specifications and product descriptions at any time without notice to 

improve reliability, function, or design.

• 

Personal information, in the form of authentication messages and other relative information, may be stored within 

Suprema products during usage. Suprema does not take responsibility for any information, including personal 

information, stored within Suprema’s products that are not within Suprema’s direct control or as stated by the 

relevant terms and conditions. When any stored information, including personal information, is used, it is the 

responsibility of the product users to comply with national legislation (such as GDPR) and to ensure proper handling 

and processing.

• 

You must not rely on the absence or characteristics of any features or instructions marked "reserved" or 

"undefined." Suprema reserves these for future definition and shall have no responsibility whatsoever for conflicts or 

incompatibilities arising from future changes to them.

• 

Except as expressly set forth herein, to the maximum extent permitted by law, the Suprema products are sold “as is”.

• 

Contact your local Suprema sales office or your distributor to obtain the latest specifications and before placing your 

product order.

Copyright Notice

Suprema has the copyright of this document. The rights of other product names, brands, and trademarks belong to 

individuals or organizations who own them..

Summary of Contents for DM-20


















Reviews: