Page 1: ...r voltage before inserting the power supply cord into the socket 2 Contact the earthing conductor to this unit with an attachment earthing screw 3 DonÕt make it spill to this unit 4 DonÕt work with flammable spray such as painting near this unit 5 DonÕt put ignitable materials such as elther benzine LP Gas alcohol etc into this unit 6 Precaution to the leakage of any gas equipment near this unit 7...
Page 2: ...rners must be level with each other and rear corners with each other If you want the refrigerator door to remain motionless when open adjust the leveling glides so that all four corners are level with each other NOTE Make sure all packing material is removed If the shipping tape has left a residue on the door touch the residue lightly with the adhesive side of tape or with isopropyl alcohol most r...
Page 3: ...CONTROL towerd MED PULL DOWN It is defrosted automatically in the refrigerator section You donÕt need to defrost the refrigerator section öTime to defrost Moisture from food within the refrigerator and in outside air that enters the refrigerator when the door open will condense against the cold refrigerating plate and turn instantly to frost As this frost builds up to a depth of more than 1 4 inch...
Page 4: ......
