Supra BLIZ'R 2600, Manual, Page: 14 / 68

English
Portable air conditioning
BLIZ’R 2600
DESCRIPTION
-
A Handle
-
B Control panel
-
C Air inlet (left)
-
D Air guide bar
-
E Wheels
-
F Remote controller
-
G Air inlet (right)
-
H Air outlet
-
I Outfall
-
J Inlet grille
-
K Exhaust pipe assembly
-
L Window seal plate assembly
-
M Power cord
REMOTE CONTROL (BATTERIES NOT
INCLUDED)
-
1 Power button
-
2 Swing button
-
3 Wind speed selection button
-
4 Temperature /Time up and down adjustment
-
button
-
5 Mode selection button
-
6 Timing function button
-
7 Fahrenheit and Celsius conversion button
CONTROL PANEL
-
(a) Power button
-
(b) Wind speed selection button
-
(c) Adjustment of temperature or time increase /
Farenheit to Celsius conversion.
-
(d) Mode selection button
-
(e) Timing function button
-
(f) Temperature /Timer display window
-
(g) Remote control receiver window
-
(h) Fahrenheit or Celsius indicator
-
(i) Swing mode
-
(j) Mode indicators
USE AND CARE:
-
Before each use, completely unplug the power
cable from the power supply.
-
Do not use the appliance if its start / stop device
does not work. Do not remove the legs from the
appliance. Do not move the appliance while it
is in use.
-
Use the handles to take or transport the appli
-
ance.
-
Do not turn the appliance over while it is in use
or connected to the mains.
-
Unplug the power supply from the mains when
not in use and before performing any cleaning
operations.
-
Keep this appliance out of the reach of children
and / or persons with reduced physical, sensory
or mental abilities or who are unfamiliar with its
use.
-
Do not expose the appliance to extreme tem
-
peratures. Keep the device in a dry, dustfree
place protected from direct sunlight. Never
leave the appliance unattended. It will also save
energy and prolong the life of the device.
-
Any improper use, or in disagreement with the
instructions for use, can be dangerous, voiding
the manufacturer’s warranty and liability.
INSTALLATION
-
Be sure to remove all packaging material from
inside the appliance.
-
Respect the legal provisions concerning safety
distances from other elements such as pipes,
electrical connections, etc.
-
Ensure that the appliance is level with respect
to the floor.
-
The appliance requires suitable ventilation in
order to work properly. Leave a space of 50cm
between walls or other obstacles. (Fig 1)
-
Do not cover or obstruct any of the openings of
the appliance.
-
Do not cover or obstruct the sides of the
appliance, and leave a minimum space of 50cm
front other walls, ceiling..
-
The plug must be easily accessible so it can be
disconnected in an emergency.
-
To achieve the highest efficiency from the
appliance it should be situated in a place where
the atmospheric temperature is between 12 and
32ºC.
-
Ensure that the extraction pipe remains in a
horizontal position. (Fig 2)
-
Do not add new sections to the extraction tube
provided, as it could cause the appliance to
malfunction.
-
The appliance should be used with its base feet
fitted.