6
Figure6
10)
③
The installation of swing arm part 1Connect the general power, turn on the power
switch, press the up button to move the arm up the highest(for a easier screw installation )
11)
③
he installation of swing arm part
2
：
Turn off the general power, connect the arm power line
with the plug in and fix the arm .Then put the view tester hanger arm into the swing arm
firmly.(Figure 7)
Figure 7
12
）
⑧
The installation of the projector base parts(See figure 8 )
There are two holes,to
fix on the table by
screw
