Page 13
Page 12
Note:
If scanning head initiation fails, the case that no light showing in the scanning
head may be caused by the problematic scanning hardware or there is red light but
unable to scan code, for this case you may exit the procedure and restart it, success of
initiation can basically guarantee normal scanning.
8)
Time setting (Picture 19), double clicking time setting can change time into
corresponding year and time, after time setting please click (Picture 20) sure.
Picture 19
Picture 20 Time setting
9)
Keyboard test (Picture 21), double click keyboard test, and enter any key to check
whether the key value displaying on screen is correct and operation is normal.
Picture 21 Keyboard test
4.2 WIFI setting
1)
Wifi on-off setting (Picture 22), click the left bottom of the terminal, procedure==
》
WIFILoader, open WIFI and click OK key (Picture 23), see whether WIFI is open at the
red rectangle downward the tastbar of the terminal. To close WIFI, please press X
button. WiFI has already opened (Picture 24).
External power supply 3.894
Supoin -26-BWLXXX-00-2013-01-08-10:28
Test touch screen
（*
Bar code setting
SIO test
（#
Time setting
（
2
Scan head test
（
4
SD card test
（
8
Input method test
（
0
Scan head initialization
（
3
Photos display
（
7
Keyboard test
（
9
Year
Time
Time setting
Sure
Keyboard test
Count
