Chapter 2 Installation
www.supmea.com
5
2.3. Electrode installation
The installation steps for the sensor as follow:
1.
Use 1 (M8U buckle) to fixing 8 (installation panel) on the railing by pool near
the installation point of the sensor
；
2.
Use glue to connect 9 (connector) and 2 (DN40) PVC pipe, and let sensor
cable run through PVC pipe, connect the sensor and make sure that water
proof has been done correctly.
3.
Using 4 (DN42 U shape clip) to fixing 2 (DN40 pipe) on 8 (installation panel),
as picture show below.
1- M8 U clamp
（
DN60
）
2- DN40 UPVC pipe
3- M6*120 Bolt
4- DN42 U clamp
5- M8 washeer
（
8*16*1)
6- M8 washer
（
8*24*2)
7- M8 spring washer
8- installation panel
9- Threaded Adapter
