Chapter II Installation
6
2.2.Sensor installation
Install steps
Specific install steps showed as figure 4:
1. Use 1 (M8U buckle) to fix 8 (installation panel) on the pipe near the
pool where the sensor is installed.
2. Connect 9 (converter) and 2 (DN40) PVC pipe with glue, and put the
sensor cable through PVC pipe, screw the sensor into 9 (converter), and make
sure that water resistance have been done.
3. Fix 2 (DN40 pipe) through 4 (DN42 u-shape clip) onto 8 (installation
panel)
Figure 4
