SUPHERBA SHTS 20, Original Instructions Manual, Page: 16 / 32

14
TECHNICAL DATA
Hedge trimmer SHTS 20
Battery voltage 20 V
Cutting length 540 mm
Weight without battery/charger 2,1 kg
Noise details
Measured according to 1) EN 60745; 2) 2000/14/ EG; Uncertainty K = 3 dB (A)
Sound pressure level L
pA
1)
73 dB (A)
Sound power level L
WA
2) 92 dB (A)
Vibration details
Total vibration values (triaxial vector sum) Determined properly EN 60745, Uncertainty K = 1,5 m/s
2
Vibration emission value a
h
<2,0 m/s 2
Battery Charger JLH262102000G
Input voltage 220 - 240 V
Frequency 50 - 60 Hz
Output voltage 21 V
Output current 2 A
Input power 60 W
Recommended battery
types
Typ LI 22 / LBC202Z-2
Battery
Typ LI 22 /
LBC202Z-2
Battery voltage 20 V
Battery capacity (Li-Ion) 2,0 Ah
Battery power 40 Wh
Recommended chargers JLH262102000G
Technical changes reserved.
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above
the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when
it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
SAFETY INSTRUCTIONS
General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term „power tool“ in the warnings refers to your
mains-operated (cordepower tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable li-
quids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose con-
trol.
2) Electrical safety
EN ENGLISH