Superwinch H10P Owner'S Manual Download Page 4

01-1

INTRODUCTION

INTRODUCTION

Please read and understand this owner’s manual before
installing  your  H10/12/14P  winch.  Your  H10/12/14P
winch  is  a  very  powerful  machine.    If  used  unsafely  or
improperly, there is a possibility that property damage or
personal  injury  can  result.    We  have  included  several
unique features in the H10/12/14P winch to minimize this
possibility;  however,  your  safety  ultimately  depends  on
your caution when using the product.

Pay  particular  attention  to  the  caution  notes  preceded
with  the symbol  shown here.    The notes  contain  advice
for your protection.

Correct  installation  of  your  H10/12/14P  winch  is  a
requirement for proper operation.

Please  Note:  The  Superwinch  model  H10/12/14P  winch
is  designed  for  total  reliability  during  vehicle  recovery
operations.    This  winch  is  not  designed  to  be  used  in
hoisting applications and Superwinch does not warrant it
to be suitable for such use.  

WARNINGS, CAUTIONS AND NOTES

These  are  given  through  these  instructions  in  the
following form :

WARNING : Procedures which must be 
followed precisely in order to avoid the 
possibility of personal injury.

CAUTION : This calls attention to procedures 
which must be followed to avoid damage to 
components.

NOTE : This calls attention to methods which
make a job easier or gives helpful 
information.

SUPERWINCH winches are not to be used to lift, support
or otherwise transport personnel. Any such use shall be
considered  to  invalidate  the  warranty  and  Superwinch
shall not be responsible for any claims arising from such
use.

Superwinch reserve the right to alter model specifications
without prior notice.

REPAIRS AND REPLACEMENTS

Before  you  contact  Superwinch  or  your  nearest  Dealer
please have ready the following information :
Kit No.
Serial No. of winch
Part No. required

POISONOUS SUBSTANCES

Many liquids and other substances used should under no
circumstances  be  consumed,  and  should  be  kept  away
from  open  wounds.  These  substances  include  (among
others) hydraulic oil.

SYNTHETIC RUBBER

Many  ‘O’  ring  seals,  flexible  pipes  and  similar  items,
when  subjected  to  fire  or  heat  can  become  highly
corrosive.  Handle  with  seamless  industrial  gloves  only.
Should skin contact occur, remove contaminated clothing
immediately and obtain medical assistance without delay.
Meanwhile, wash the affected area with copious amounts
of cold water or limewater for 15 to 60 minutes.

RECYCLING AND THE ENVIRONMENT

It  is  illegal  to  dispose  of  used  oil  in  the  ground,  down
sewers or drains or into waterways.
Dispose  of  used  oil  through  authorised  waste  disposal
contractors.  If  in  doubt  contact  your  local  Authority  for
advice on disposal facilities.

WINCHING TECHNIQUES

Before using your winch it is very important that you read
the  booklet  sent  to  you  with  your  winch  entitled  the
“Handbook  of  Winching  Techniques  for  Vehicle
Recovery”.  Please  read  and  understand  this  handbook
before using your Superwinch and it’s accessories. It has
been  supplied  with  your  winch  to  encourage  safe
operation  -  if  used  unsafely  or  improperly,  there  is  a
possibility  that  property  damage  or  personal  injury  can
result,  since  your  safety  ultimately  depends  on  your
caution when using these products.

01

INTRODUCTION

Summary of Contents for H10P




















Reviews: