Operating the remote control
1.
Install batteries.
2.
Hold down the connection button for 2-5 seconds, then turn on
the power button located on the vehicle dashboard.
3.
Remote lights flash when the connection is successful.
4.
Brake Button:
Press button to stop vehicle. Press it again to
release the brake.
5.
Speed Button:
Selects the level of speed for the vehicle
(low, normal, or high speed).
BATTERY REPLACEMENT AND DISPOSAL:
The battery will eventually lose the ability to hold a charge. Depending on
the amount of use, and varying conditions, the battery should operate for
one to three years. Follow these steps to replace and/or dispose of the
battery:
•
Open the front hood of the vehicle
•
Disconnect the battery connectors (Red).
•
Position the battery lock switch to unlock. Carefully lift the battery - you
may want to wear protective gloves before removal -
Do Not
lift the battery
by its connectors or cables.
•
Place the dead battery in a plastic bag.
•
Replace the battery and reconnect the connectors.
•
Close the Hood.
