ASSEMBLY INSTRUCTIONS:
1.
Remove car from box and plastic.
Lay out all parts to be
assembled. Unplug and remove both motor/gearboxes from the
battery area. Turn car upside down so that the bottom of the car is
facing up.
2.
Install rear wheels & motor/gearbox on rear axle:
Right side -
Slide motor/gearbox onto the rear axle while feeding the
electrical connection through the hole in the body into the
battery area and reconnect the electrical connection to the
white connector with right side wires. Slide a previously
assembled wheel onto the axle. Slide washer on and secure the
assembly with nut that is provided. Install wheel covers onto
the wheels by lining up the 5 tabs on the covers with the holes
on the tires. Snap them in gently until cover is securely on tire.
Repeat steps for left side. Electrical connection will be made to
the white connector with left side wires.
See Fig. 3.