7: Installation of the steering wheel:
Remove nut and bolt from the steering wheel assembly. Connect the
wire connector from the steering wheel to the corresponding
connector at the steering column. Slide the steering wheel onto the
steering shaft while feeding the wire connector into the steering
column. Line up the hole in the steering column to the hole through
the steering wheel assembly and slide bolt through. Secure with the
nut.
NOTE:
Due to possible movement in the steering shaft through the
column, the hole in the steering shaft may not line up with the hole
through the steering wheel assy. If this happens, use one hand under
the car and push the steering shaft upward while attempting to line up
the holes for the bolt to secure the steering wheel. Please see photo.
