Installing the Windshield &
Rearview Mirror Assembly
1.
Install the windshield into the
appropriate slots in the main body,
and push in
until a “click” is heard
snapping the part into place.
2.
Install the left rearview mirror into
the slot in the main body, and push
downward until clicked into place.
Repeat steps for opposite side of car.
Installing the Steering Wheel &
Back Tail
1.
Remove black plastic protective cap
from the steering shaft and discard.
2.
Plug the electrical connector on the
steering wheel into the connector
located near the steering rod close to
the dashboard area. Feed the
connected wires through the hole
near the steering shaft.
3.
Remove the nut from the screw
located in the steering shaft, remove
the screw from the steering shaft.
4.
Install the steering wheel onto the
steering rod and secure with a screw
and nut previously removed. Install
the screw from the left side of the
steering wheel, install nut on the end
of the screw and tighten until snug
against shaft of steering wheel.
5.
Plug the electrical connector
attached to the back tail into the
connector located at the rear of the
car body.
6.
Put the tail into the slot on the rear
of the body and push firmly until a
“click” is heard
snapping the part into
place.
Making Connections &
Installing the Seat
1.
The battery is connected to the
car prior to shipping to allow for
testing of the car. Therefore,
the black and red wires will be
connected.
2.
Connect the white plastic
connector with the blue and
yellow wires from the motor to
