background image

 

OPERATING INSTRUCTIONS 

1.POWER ON/OFF (1) 

By pressing this key(1),the unit is switched on and off. 

This unit is turned on by pressing any key. 

Insert the front panel in the unit and push POWER button  

in order on the unit.  

Push PWR button newly in order to switch off the unit and  

Push RELEASE button(13) to release the front panel.  

NOTE: Never release the front panel when the unit is on.  

Power rem ains on even when car radio is off.   

2.SELECT 

3.VOLUME UP/DOWN 

Press the VO(+) and VOL(-) keys to control the VOLUME.   

To select other functions, press the SEL(2) button shortly  

until the desired functions is shown on the display.Figure 1    

shows how control functions are selected using the SEL button.               

Fig. 1 Selection of sound control functions 

1. VOLUME 2. SELECT 3. BASS 4. TREBLE 5. BALANCE  

6. FADER VOL.UP Button (+) and VOL.DOWN Button (-). 

Increase or decrease the volume by pr or -.  

These buttons can be user to adjust the BASS, TREBLE, 

BALANCE and FADER.  

1) AUDIO DSP FUNCTION 

When press the SEL button for more than 2 seconds, it is  

activated as selecting mode of these function.                                       

Summary of Contents for CS-164



















Reviews: