Superpro Settings and Menu´s
The Superpro has a number of settings that can be reached by doing the following:
1. TURN ON DEVICE
2. Use the arrow-keys to choose between the menu settings
The device have four menus:
MEASURE
The menu measure is used to choose the crop to be tested.
BATTERY
This menu will give you an overview of the battery level.
CLEAR AVERAGE
This menu is used to clear the average of the last five measurements done.
1
.
Turn on the meter by pressing ON/TEST.
2
.
When MEASURE appears in the display use the arrow keys
⇑
or
⇓
until CLEAR AVERAGE is displayed.
3
.
Accept this choice by pressing ON/TEST. OK will appear in the display followed by an automatic return to
MEASURE.
CALIBRATION
The calibration menu is used to recalibrate the meter. Differing growth factors between years and between
varieties can have an effect on the electrical characteristics of the crop and it can therefore be necessary to
recalibrate the meter. See page 8.
Some more valuable information about the moisture
meter
Using the averaging facility
1
. Due to the changing nature of grain when being harvested or dried, it is recommended to take several
readings. These will automatically be used to create an average reading.
2
. It is recommended to take 3-5 measurements from the same batch of grain and use the average as the
true moisture content of the grain.
3
. Remember to empty, clean and refill the test cell between each reading.
Ver 1.1.0
GB
Page 9/12