SUPERSCAN SSH2442, Service Manual

Page: 14 / 48

Item Color Temperature Adjustment (Cool) Adj point
Adjustment Preparations Adjustment Procedures Remarks
(1)
(2)
(3)
Set info Fctory Adjustment mode
Input : RGB 1 VGA
Signal : VGA (31.5KHz) 0.7V
Windows ratio : 100%
Confirm that the screen size is
“Full”
(1)
(2)
(3)
(4)
Perform the following
adjustment with remote control
Set the CRT analyzer (CA100)
at center of panel
After receiving pc signal, set
down the one among
adjustments and adjustment the
value.
Start the FACTORY mode,
1. Use ϧϰ / ENTER button
select “Cool" mode.
2. Push and adjustment
3. If adjutment "G" and "B" please
Envirment:
20lux or less
Color temperature should
be adjusted under the
condition in which the
screen is brightest, thus
the initial value of
adjustment is it’s
maximum value.
Only reducing the
brightness controls the
adjustment, thus weaken
the brighter color to adjust.
FACTORY MODE LP8SA
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
FACTORY MODE LP8SA
WARM
NORMAL
COOL
NV CLEAR
AUTO COLOR
MAX BRIGHT
BLACK LEVEL
adjustment "R" level
Normal
B
228
repeat 1~2 steps.
Color mode while the
Cool mode while the
following is selected
G
R
210
186
<Specification>
Video color tempertaure (Cool)
x=0.268 0.005
y=0.283 0.005
(Color Temp:12000 K 0MPCD)
+-
+-
+- o
Use White pattern
1 4
SSH2442