Chapter 4: AMI BIOS
4-11
Internal HDMI/Display Port Codec (Available if Azalia set to Enabled)
Select Enabled to enable the internal HDMI/Display port codec for Azalia.
Wake on LAN
Use this feature to activate the Wake On LAN (WOL) feature. The options are
Enabled
, and Disabled.
Note
: The WOL feature cannot be disabled if ME is on at Sx state.
Deep Sx
Select Enabled to enable Deep Sleep State support. The options are
Disabled
,
Enabled in S5 and Enabled in S4-S5"
.
SLP_S4 Assertion Width
Use this feature to select a minimum assertion width of the SLP_S4 signal.
The options are Disabled, 1-2 Seconds, 2-3 Seconds, 3-4 Seconds, and
4-5
Seconds
.
IDE/SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the SATA Devices and displays the following items:
SATA Controllers
This item enables or disables the on board SATA controller. The options are
En-
abled
and Disabled:
SATA Mode Selection
This item selects the mode for the installed drives. The options are IDE Mode,
AHCI
Mode
and RAID Mode. The following are displayed depending on your selection:
IDE Mode
The following items are displayed when IDE Mode is selected:
IDE Legacy / Native Mode Selection
Use this feature to specify the operating mode of the integrated SATA
controllers. The options are
Native
and Legacy.
Serial ATA Port 0~5
This item displays the information detected on the installed SATA drives
on the particular SATA port.
