Supero X9DRFF-7G+, User Manual

Page: 86 / 105

4-18
X9DRFF-iG+/iTG+/7G+/7TG+ Motherboard User’s Manual
Load Onboard SAS OPROM
Select Enabled for onboard SAS Option ROM support. This is to boot the computer
using a SAS device. The options are Disabled and
Enabled .
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are
Onboard , and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and
Disabled .
IPv4 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv4 PXE Support. The options are
Enabled
and Disabled.
IPv6 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv6 PXE Support. The options are Enabled
and
Disabled .

Serial Port Console Redirection
COM 1/SOL
These two submenus allow the user to configure the following Console Redirection
settings for a COM port specified by the user.
COM1/SOL (Serial Over LAN) Console Redirection
Select Enabled to use COM1 or SOL (Serial_Over_LAN) port selected by the user
for Console Redirection. The options are Enabled and Disabled. The default setting
for COM1 is
Disabled
, and for SOL is
Enabled
.

Console Redirection Settings
Use this feature to specify how the host computer will communicate with the client
computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to
add color and function key support. Select ANSI to use the Extended ASCII Char-
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible Firmware Interface) for network stack sup -
port. The options are Enabled and
Disabled
.
Serial Port 2 Attribute
Use this feature to select the attribute for serial port 2. The options are SOL (Serial On LAN), and COM.