Supero X9DR3-LN4F+ User Manual Download Page 97

Page: 97 / 107

Chapter 4: AMI BIOS

4-27

Gateway IP Address

This item displays the Gateway IP address for this computer. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253).

4-5 Boot

This submenu allows the user to configure the following boot settings for the

system.

CSM Support

Select Enabled to support the EFI Compatibility Support Module (CSM), which
provides compatibility support for traditional legacy BIOS for system boot. The op-
tions are

Enabled

and Disabled.

Boot Option Priorities

Boot Option #1

This item allows the user to select the first boot drive. Select a LAN device to

boot the system from the network connection. Select UEFI to boot the system
from the UEFI: Built-in EFI Shell. The options are

LAN Device

, UEFI: Built-in EFI

Shell, and Disabled.

Boot Option #2

This item allows the user to select the first boot device. Select a LAN device to

boot the system from the network connection. Select UEFI to boot the system
from the UEFI: Built-in EFI Shell. The options are LAN Device,

UEFI: Built-in

EFI Shell

, and Disabled.

Summary of Contents for X9DR3-LN4F+












































































































Search results

Summary of Contents for X9DR3-LN4F+

Reviews:

Related manuals for X9DR3-LN4F+

Brands by name

Popular brands

Supero X9DR3-LN4F+, User Manual

Search results

Summary of Contents for X9DR3-LN4F+

Reviews:

Related manuals for X9DR3-LN4F+

Brands by name

Popular brands