Chapter 1: Overview
1-5
JPME1
ME Recovery
Pins 2-3 (Normal)
X9DAi Jumpers
Jumper
Description
Default Setting
J29/J30
SMB Enable
Pins 1-2 (Enabled)
JBT1
Clear CMOS
See Chapter 3
JI
I2
C1/JI
I2
C2
SMBus to PCI-E Slots
Pins 2-3 (Normal)
JPI1
IEEE1394a Enable
Pins 1-2 (Enabled)
JPL1/2
GLAN1/GLAN2 Enable
Pins 1-2 (Enabled)
JWD1
Watch Dog
Pins 1-2 (Reset)
X9DAi Connectors
Connectors
Description
7.1 Audio
8 Channel (7.1) High-Definition Backplane Audio Connector
BT1
Onboard Battery (See Chpt. 4 for Used Battery Disposal)
CNF1/CNF2
IEEE 1394a 1/2 Connectors
COM1
Backplane COM Port1
CPU1 Slot1/Slot3
PCI-E 3.0 x16 Slots (The slots are available when CPU1 is installed.)
CPU2 Slot5
PCI-E 3.0 x16 Slot (This slot is available when CPU2 is installed.)
CPU1 Slot2
PCI-E 3.0 x4 Slot (This slot is available when CPU1 is installed.)
CPU2 Slot4/Slot6
PCI-E 3.0 x8 Slots (The slots are available when CPU2 is installed.)
FAN1~7, FANA
CPU/System Fan Headers (Fan6/Fan7: CPU 1/2 Fans)
I-SATA 0~5
Intel SB SATA Connectors 0~5 (SATA 0/1: SATA3 Ports, SATA2~5: SATA
2 ports)
J18
Audio Header
J22
ATX 24-Pin Power Connector (See Warning on Pg. 1-6.)
JD1
Speaker/Power LED Indicator
JF1
Front Panel Control Header
JL1
Chassis Intrusion
JIPMI1
SIM_BMC Slot
JIPMB1
4-pin External BMC I
2
C Header (for an IPMI Card)
JOH1
Overheat/Fan Fail LED Indicator
JPI
I2
C1
Power Supply SMBbus I
2
C Header
JPWR1/JPWR2
12V 8-Pin Power Connectors (See Warning on Pg. 1-6.)
JSD1
SATA DOM (Device_On_Module) Power Connector
JSPDIF_In
SPDIF_(Sony/Philips Digital Interface)_In Header
JSPDIF_Out
SPDIF_(Sony/Philips Digital Interface)_Out Header
JTPM1
TPM (Trusted Platform Module)/Port 80 Header
(PS2) KB/Mouse
Keyboard/Mouse
