Supero X7DCX, User Manual, Page: 66 / 91

4-10
X7DCX User's Manual
X
PCI Confi guration
Access the submenu to make changes to the following settings for PCI devices.
Onboard GLAN-1/Onboard GLAN-2 (Gigabit- LAN) OPROM Confi gure
Select Enabled to allow the system to boot from the GLAN-1 connection or the
GLAN-2 connection. The options are Disabled and Enabled.
Default Primary Video Adapter
This item allows the user to select the Primary Video Adapter between two adapters
instead of selecting among three or more adapters. The options are Other and
Onboard Video .
Reset Confi guration Data
If set to Yes, this setting clears the Extended System Confi guration Data (ESCD)
area. The options are Yes and No .
X
Slot1 PCI 33MHz, Slot2 PCI-Exp. x8, Slot3 PCI-Exp. x8,
Slot4 PCI-Exp. x8, Slot5 PCI-Exp. x8, Slot6 PCI-Exp. x8 and
PCI-Exp. x4
Access the submenu to make changes to the following items:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options
are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are Enabled and Disabled .
Latency Timer
This setting allows you to set the clock rate for Bus Master. A high-priority, high-
throughout device may benefi t from a greater clock rate. The options are Default ,
0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novell and
other Operating Systems, please select the option: other. If a drive fails after
the installation of a new software, you might want to change this setting and
try again. A different OS requires a different Bus Master clock rate .
Large Disk Access Mode
This setting determines how large hard drives are to be accessed. The options are
DOS or Other (for Unix, Novelle NetWare and other operating systems).