Supero X7DA3+, User Manual

Page: 96 / 127

C-4
X7DA3+ User's Manual
Creating Arrays
Before creating arrays, make sure that the disks for the array are connected and
installed in your system. Note that disks with no usable space, or disks that are un-
initialized are shown in gray and cannot be used.
To create an array:
1. From the Array Confi guration Utility menu, select Create Array.
2. Select the disks for the new array and press <Insert> (as the screen shown below).
(Note: To de-select any disk, highlight the disk and press <Delete>.)
3. After both disks for the new array are selected, press <Enter>. The Array Properties
menu displays (as the screen shown below).