Chapter 4: AMI BIOS
4-19
Port 0 ~ Port 3 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRE-
SET initialization sequence to the device. The options are Enabled and
Disabled
.
PCIe/PCI/PnP Configuration
This feature allows the user to set the PCI/PnP configurations for the following items:
Above 4G Decoding
Select Enabled for 64-bit devices to be decoded above the 4GB address space
If 64bit PCI decoding is supported by the system. The options are
Disabled
and
Enabled.
VGA Palette Snoop
Select Enabled to support VGA palette register snooping which will allow the
PCI cards that do not contain their own VGA color palette to examine the video
cards palette and mimic it for proper color display. The options are
Disabled
and
Enabled.
SLOT1 PCI-E 2.0 X16 OPROM
(X10SLV only)
SLOT1 PCI-E 3.0 X16 OPROM
(X10SLV-Q only)
Select Disabled to deactivate the selected slot, Legacy to activate the slot in legacy
mode and EFI to activate the slot in EFI mode. The options are Disabled,
Legacy
and EFI.
Launch Storage OPROM Policy
This feature controls how the system executes UEFI (Unified Extensible Firmware
Interface), and legacy storage OPROM. Select Legacy Only to boot the system
using a legacy device installed in a PCI slot. The options are UEFI Only and
Legacy Only
.
Other PCI Device ROM Priority
This feature selects a PCI device Option ROM for system boot if this device is not
a network, mass storage, or video device. The options are UEFI Only and
Legacy
Only
.
Onboard LAN1/Onboard LAN2
This setting enables or disables the designated onboard LAN port. The options
are Disabled and
Enabled
.
