Chapter 1: Introduction
1-5
X10SL7-F Headers/Connectors
Connector
Description
Battery
Onboard Battery
COM1/COM2
COM1 (Port)/COM2 (Header)
Fan1 - Fan4, FanA System/CPU Fan Headers
JF1
Front Panel Control Header
JL1
Chassis Intrusion Header
JLED1
Power LED Indicator Header
JPI
2
C1
Power SMB (System Management Bus)
JPW1
24-pin ATX Main Power Connector (Required)
JPW2
+12V 8-pin CPU power Connector (Required)
JSD1
SATA DOM (Device_On_Module) Power Connector
JSTBY1
Standby Power Header
JTPM1
Trusted Platform Module/Port 80 Connector
LAN1/LAN2
Gigabit (RJ45) Ports (LAN1/2)
IPMI_LAN
IPMI_Dedicated LAN
I-SATA0/I-SATA1
(Intel PCH) Serial ATA (SATA 3.0) Ports 0/1 (6Gb/sec)
I-SATA 2 - I-SATA5 (Intel PCH) Serial ATA (SATA 2.0) Ports 2~5 (3Gb/sec)
L-SAS 0-7
SAS Connectors 0-7 (supported by the LSI 2308 SAS controller)
(PCH) Slot 5
PCI-Express 2.0 x4 in x8 Slot
(CPU) Slot 6
PCI-Express 3.0 x8 in x16 Slot
SPKR1
Internal Speaker/Buzzer
SW1
UID (Unit Identifier) Switch
6-SGPIO 1/2
Serial_Link General Purpose I/O Headers 1/2 for SAS Connections
T-SGPIO 1/2
Serial_Link General Purpose I/O Headers 1/2 for SATA Connections
USB 2/3, 4/5
Backpanel USB 2.0 Ports 2/3, 4/5
USB 0,1 (3.0)
USB 3.0 Ports 0, 1 (USB 0: Type A Connector)
USB 8/9
Front Panel Accessible USB 2.0 Headers 8/9
VGA
Backpanel VGA Port
X10SL7-F LED Indicators
LED
Description
Status
LE3
Standby Power LED On: Power On
LE4
UID LED
Blue (On): Unit Identified
LE5
BMC Heartbeat LED Green (Blinking): BMC Normal
LE6
Power Status LED Red: PWR Fail/Yellow: Standby PWR Active/Green: PWR On Normal
LEDS2 SAS LED
Green (Blinking): SAS Active/Red (Solid On): SAS Error
