Chapter 1: Introduction
1-5
Introduction
Jumper
Description
Default Setting
JBT1
CMOS Clear
See Chapter 2
JP12
PWR Fault
See Chapter 2
JP13
3rd PW Supply Fail Alarm Enable
Off (Disabled)
JP14
Alarm Reset
Off (Disabled)
JPA1
SCSI Controller Enable
Pins 1-2 (Enabled)*Note
JPA2, JPA3
SCSI CHA(JPA2),CHB(JPA3)Term.En Off (Enabled)(*Note)
JPF
Force PWR On
Off (Normal)
JPG1
VGA Enable
Pins 1-2 (Enabled)
JPL1
GLAN Enable/Disable
Pins 1-2 (Enabled)
JWD
Watch Dog
Pins 1-2 (Reset)
Connector
Description
ATX PWR (J1B4)
Primary ATX PWR Connector
Aux. PWR (J32)
+12V 4-pin Auxiliary System PWR (*Required)
CPU PWR(J1D1)
+12 V 8-pin CPU PWR Connector (*Required)
COM1 (J6)/COM2 (J7)
COM1/COM2 Serial Port Connectors
FAN 1-8
Fans 1-8 (3-pin: Fans 1-4, 4-pin: Fans 5-8)
DIMM#1A-DIMM#4B
Memory DDRII Slots
GLAN 1/2 (JLAN1/2)
G-bit Ethernet Ports
J3/J4
IDE1/2 Hard Disk Drive Connectors
J5
VGA Connector
J20
IPMI Connector
J22
System Management Bus Header
J23
Parallel (Printer) Port
J24
Power System Management Header
JA1/JA2
SCSI Channel A/Channel B Connectors(*Note)
JD1
PWR LED(pins1-3)/SpeakerHeader (pins 4-7)
JF1
Front Control Panel Connector
JL1
Chassis Intrusion Header
JOH
Overheat LED
JP8
Floppy Disk Drive Connector
JS1/JS2
Intel SATA 0/1 Connectors
JWOL
Wake-on-LAN Header
JWOR
Wake-on-Ring Header
USB 0/1
Back Panel USB Ports
USB 2/3/4
Front Panel Universal Serial Bus Headers(USB2/
3:JD2, USB4:J11)
Quick Reference ( X6DH8-G2/X6DHE-G2)
(*Please refer to Chapter 2 for pin definitions and detailed
information.)
(*Note: for X6DH8-G2 only)
