Supero SuperWorkstation PIO-737A-i-MA015, User Manual

Page: 7 / 50

Chapter 1
Workstation Overview
1-1 Introduction
The PIO-737A-i-MA015 is a high-end turnkey workstation. A replacement parts list
is shown below. A complete list of safety warnings is provided on the Supermicro
web site at http://www.supermicro.com/about/policies/safety_information.cfm
Chapter 1: Workstation Overview
1-1
Replacement Parts List
Qty. Defi nition Part Number
1 Black SC733 Mid Tower Chassis w/ 665W Power Supply CSE-733TQ-665BP
1 Black Lite-On 5.25" HH 24x DVD-RW SATA Drive DVM-LITE-DVDRW24-HBT
5 61-cm SATA Cables CBL-0044L
1 12-cm Chassis Fan FAN-0124L4
2 Sandy Bridge 4C E5-1620 3.6G 10M 130W 2011 Processor P4X-DPE52630-SR0KV
1 Motherboard X9DAi
4 4GB DDR3-1600 1.5V 2Rx8 LP ECC REG DIMMs MEM-DR340L-SL02-ER16
1 Seagate 1.0 TB 6Gb/s 7.2k RPM, 3.5" SATA 3.0 HDD HDD-T1000-ST1000NM0011
2 2U Active CPU Heat Sink for X9 Socket R SNK-P0048AP4
1 NVIDIA® Quadro 4000 AOC-GPU-NVQ4000
1 Standard I/O Shield for X9DA6 with EMI Gasket MCP-260-00045-0N
System Recovery Instructions
This computer includes a hidden partition which contains a backup of your factory
Windows installation. In case of a system failure, you can use this backup to restore
your computer to a working state in just a few minutes.
Since this backup resides on the same physical hard-disk as your current Windows
installation, a hardware failure of the hard-disk will prevent you from reinstalling
Windows. There are two different ways to initiate a system recovery of your system:
•
Trigger recovery from OS level (run FullRestore.exe)
•
Trigger recovery during system boot up (press F10 key).
Warning: System Recovery will wipe all of your personal data and restore the system
to OOBE. You must have your CD-KEY from COA label ready before performing this
action. System Recovery is an automated, one-step process. Do not initiate a system
recovery unless you are prepared for a complete re-installation back to the factory
default installation.