Supero SuperWorkstation 7045A-8, User Manual

Page: 51 / 126

Chapter 5: Advanced Serverboard Setup
5-17
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL. See the table on the
right for pin defi nitions. You must
enable the LAN Wake-Up setting in
BIOS to use this feature. You must
also have a LAN card with a Wake-
on-LAN connector and cable.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR. This function allows
your computer to receive and "wake-
up" by an incoming call to the modem
when in suspend state. See the table
on the right for pin defi nitions. You
must have a WOR card and cable to
use this feature.
SMB
The System Management Bus header
(for the PCI bus) designated J18 is
located near the SATA ports. Connect
the appropriate cable here to utilize
SMB on your system. See the table
on the right for pin defi nitions.
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up
Wake-On-LAN Pin
Defi nitions (JWOL)
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
SMB Power (I
2
C)
The header at J17 is for I
2
C, which
may be used to monitor the status of
the power supply, fan and system tem-
perature. See the table on the right for
pin defi nitions.
SMB Header
Pin Defi nitions (J18)
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 No Connection
SMB Power (I 2 C)
Pin Defi nitions (J17)
Pin# Defi nition
1 Clock
2 Data
3 Power Fail
4 Ground
5 +3.3V