Supero SUPERSERVER AS-4021GA-62R+F, User Manual

Page: 103 / 116

Chapter 7: BIOS
7-13
Hardware Health Confi guration
CPU Overheat Alarm
Use the "+" and "-" keys to set the CPU temperature threshold to between 65
o
and
90
o
C. When this threshold is exceeded, the overheat LED on the chassis will light up
and an alarm will sound. The LED and alarm will turn off once the CPU temperature
has dropped to 5 degrees below the threshold set. The default setting is 72
o
C .
Fan Speed Control Modes
This feature allows the user to determine how the system will control the speed of
the onboard fans. Select "Workstation" if your system is used as a Workstation.
Select "Server" if your system is used as a Server. Select "Disable" to disable the
fan speed control function to allow the onboard fans to continuously run at full
speed (12V). The options are Full Speed (FS), Performance (PF), Balanced (BL)
and Energy Saving (ES) .
FAN1 Speed through FAN8 Reading
The speeds of the onboard fans (in rpm) are displayed here.
Other items in the submenu are systems monitor displays for the following infor-
mation:
NB 1 Temperature, NB2 Temperature, SAS Temperature, CPU1 VCore, CPU2
VCore, CPU1 Mem VTT, CPU2 Mem VTT, CPU1 Mem, CPU2 Mem, NB1 1.1V,
NB2 1.1V, 5V, +12V, -12V, 3.3Vcc, 3.3VSB, VBAT and HT Voltage.
ACPI Confi guration
High Performance Event Timer
This setting Enables or Disables the high performance event timer.
PS/2 KB/MS Wakup
This option Enables or Disables the keyboard/mouse wakeup for these de-
vices.
USB Device Wakup
Use this setting to Enable or Disable USB device wakup from S3/S4.
ACPI Aware O/S
This setting enables or disables ACPI support for the operating system. Use En-
able (Yes) if the OS supports ACPI. Use Disable (No) if the OS does not support
ACPI. Options are Yes or No.