Supero SUPERSERVER 7046GT-TRF, User Manual

Page: 42 / 126

5-6
SUPERSERVER 7046GT-TRF Series User's Manual
5-5 Installing the Processor and Heatsink
!
Warning: Avoid placing direct pressure to the top of the processor
package. Always remove the power cord fi rst before adding, removing
or changing any hardware components.
Notes:
Always connect the power cord last and always remove it before adding, re-
•
moving or changing any hardware components. Make sure that you install the
processor into the CPU socket before you install the CPU heatsink.
If you buy a CPU separately, make sure that you use an Intel-certifi ed multi-
•
directional heatsink only.
Make sure to install the serverboard into the chassis before you install the CPU
•
heatsinks.
When receiving a serverboard without a processor pre-installed, make sure that
•
the plastic CPU socket cap is in place and none of the socket pins are bent;
otherwise, contact your retailer immediately.
Refer to the Supermicro web site for updates on CPU support.
•
Press the socket clip to release 1.
the load plate, which covers
the CPU socket, from its locked
position.
Gently lift the socket clip to open 2.
the load plate.
Hold the plastic cap at its north 3.
and south center edges to remove
it from the CPU socket.
Note : The photos on this page and
succeeding pages are for illustration
purposes only. They do not necessarily
refl ect the exact product(s) described
in this manual.
Socket Clip Load Plate
Plastic Cap
Holding the north & south edges
Installing an LGA1366 Processor