Supero SuperServer 7044A-82R, User Manual

Page: 54 / 126

5-18
S
UPER
S
ERVER 7044A-82R Manual
GLAN Enable/Disable
Change the setting of jumper JPL1 to
enable or disable the onboard GLAN
ports (GLAN1 and GLAN2) on the
serverboard. See the table on the
right for jumper settings. The default
setting is enabled
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
GLAN
Enable/Disable
Jumper Settings
(JPL1)
SCSI Controller Enable/
Disable
Jumper JPA1 allows you to enable or
disable the SCSI headers. The de-
fault setting is pins 1-2 to enable all
four headers. See the table on the
right for jumper settings.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
SCSI Enable/Disable
Jumper Settings
(JPA1)
SCSI Termination Enable/
Disable
Jumpers JPA2 and JPA3 allow you to
enable or disable termination for the
SCSI connectors. Jumper JPA2 con-
trols SCSI channel A and JPA3 is for
channel B. The default setting is open
to enable (terminate) both SCSI chan-
nels.
Note: In order for the SCSI drives to
function properly, please do not
change the default setting set by the
manufacturer. See the table on the
right for jumper settings.
Jumper
Position
Open
Closed
Definition
Enabled
Disabled
SCSI Channel Termination
Enable/Disable
Jumper Settings
(JPA2, JPA3)