Supero SuperServer 6028R-TR, User Manual

Page: 68 / 126

5-22
S
UPER
S
ERVER 6028R-TR/TRT User's Manual
I
2
C to PCI-E Slots
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
I
2
C Bus to PCI-Exp. Slots
Jumpers JI
2
C1 and JI
2
C2 allow you to
connect the System Management Bus
(I
2
C) to the PCI-Express slots. The
default setting is disabled. Both jump-
ers must be set to the same setting
See the table on the right for jumper
settings.
BMC Enable
Jumper JPB1 allows you to enable
the embedded Winbond BMC (Base-
board Management Controller) to
provide IPMI 2.0/KVM support on the
serverboard. See the table on the right
for jumper settings. BMC Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 BMC Enabled
Pins 2-3 Disabled
Manufacturer Mode Select
Close pins 2 and 3 of jumper JPME2
to bypass SPI flash security and force
the system to operate in the Manufac-
turer Mode, which allows the user to
flash the system firmware from a host
server for system setting modifications.
See the table on the right for jumper
settings.
ME Mode Select
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacture Mode
BIOS Recovery Jumper
Settings
Both Jumpers Definition
Pins 1-2 Enabled
Pins 2-3 Normal
BIOS Recovery Enable (JBR1)
Close pins 1 and 2 of jumper JBR1 for
BIOS recovery. The default setting is
on pins 2 and 3 for normal operation.
See the table on the right for jumper
settings.