manualshive.com logo in svg

Supero SuperServer 6026TT-HIBQF, User Manual, Page: 104 / 112

Share
Download
Supero SuperServer 6026TT-HIBQF User Manual Download Page 104

7-30

SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F User's Manual

6.  Once you've completed the instructions given, a screen will display to indicate 

that remote fl ashing is starting and the new BIOS fi le is being uploaded.

7.  To use Hyper Terminal to transfer the XModem protocol by using the "Send 

File" dialog under the "Transfer" menu, follow the instructions below to 

complete XModem transfers.

a.

 

Select the "Transfer" menu and enter <Send>. 

b.

 

Specify the location of the ROM fi le and select the proper protocol (XMo-

dem). 

c.

 

Press <Send> to start ROM File extraction. (See the picture below.) 

d.

 

Once the ROM fi le extraction is completed, the message: "New BIOS re-

ceived OK" will display.

8.  Once remote BIOS fl ash is completed, the system will reboot.

Note: 

AMIBIOS Serial Flash will work with any terminal communications 

program that supports VT-100 and XModem protocols, including protocols 

designed for GNU/LINUX & BSD operating systems such as minicom. It 

is recommended that the terminal program be confi gured to use the 'CR/

LF' style of line termination.

Summary of Contents for SuperServer 6026TT-HIBQF

















































































































Reviews:

No comments