Supero SUPERSERVER 6012P-6, User Manual

Page: 34 / 110

S
UPER
S
ERVER 6012P-6 Manual
4-2
4-2 General Safety Precautions
Follow these rules to ensure general safety:
!
Keep the area around the SuperServer 6012P-6 clean and free of clutter.
!
The SuperServer 6012P-6 weighs approximately 30 lbs (13.6 kg) when
fully loaded. When lifting the system, two people at either end should
lift slowly with their feet spread out to distribute the weight. Always
keep your back straight and lift with your legs.
!
Place the chassis top cover and any system components that have been
removed away from the system or on a table so that they won't
accidentally be stepped on.
!
While working on the system, do not wear loose clothing such as
neckties and unbuttoned shirt sleeves, which can come into contact
with electrical circuits or be pulled into a cooling fan.
!
Remove any jewelry or metal objects from your body, which are excellent
metal conductors that can create short circuits and harm you if they
come into contact with printed circuit boards or areas where power is
present.
!
!
The power supply power cord must include a grounding plug and must be
plugged into grounded electrical outlets.
!
Motherboard Battery: CAUTION - There is a danger of explosion if the
onboard battery is installed upside down, which will reverse its
polarities. On the P4DPR-6GM+, the positive side should be facing up.
This battery must be replaced only with the same or an equivalent type
recommended by the manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
!
CD-ROM Laser: CAUTION - this server may have come equipped with a
CD-ROM drive. To prevent direct exposure to the laser beam and
hazardous radiation exposure, do not open the enclosure or use the
unit in any unconventional way.