Supero SUPERSERVER 5018D-MF, User Manual

Page: 100 / 120

7-18
S
UPER
S
ERVER 5018D-MF User's Manual
ment) to boot the computer using a PXE device installed in a LAN port specifi ed.
Select Disabled to prevent system boot using a device installed in a LAN port. The
options are Disabled, PXE and iSCSI. The default setting for Onboard LAN1 Op-
tion ROM is PXE . The default setting for Onboard LAN2 Option ROM is Disabled .
VGA Priority
This feature selects the priority between the onboard and fi rst offboard video device
that has been detected. The options are Onboard and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unifi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled .
Ipv4 PXE Support (Available when Network Stack is set to Enabled)
Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for boot sup-
port. If this feature is set to Disabled, Ipv4 PXE boot option will not be supported.
The options are Enabled and Disabled.
Ipv6 PXE Support (Available when Network Stack is set to Enabled)
Select Enabled to enable Ipv6 PXE (Preboot Execution Environment) for boot sup-
port. If this feature is set to Disabled, Ipv6 PXE boot option will not be supported.
The options are Enabled and Disabled.

ACPI Settings
High Precision Event Timer
Select Enabled to activate the High Performance Event Timer (HPET) that produces
periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in
synchronizing multimedia streams, providing smooth playback and reducing the de-
pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-
tion embedded in the CPU. The High Performance Event Timer is used to replace
the 8254 Programmable Interval Timer. The options are Enabled and Disabled.
WHEA Support
This feature Enables the Windows Hardware Error Architecture (WHEA) support for
the Windows 2008 (or a later vision) operating system. The options are Enabled
and Disabled.

Intel Server Platform Services Confi guration
The following status information for this motherboard are displayed:
•
ME (Management Engine) BIOS Interface Version