Supero SuperServer 5015B-MF, User Manual

Page: 21 / 102

Chapter 2: Server Installation
2-7
Figure 2-3. Installing the Server into a Rack
Installing the Server into a Telco Rack
To install the SuperServer 5015B-MF into a Telco type rack, use two L-shaped
brackets on either side of the chassis (four total). First, determine how far the
server will extend out the front of the rack. Larger chassis should be positioned to
balance the weight between front and back. If a bezel is included on your server,
remove it. Then attach the two front brackets to each side of the chassis, then the
two rear brackets positioned with just enough space to accommodate the width of
the rack. Finish by sliding the chassis into the rack and tightening the brackets to
the rack. See Figure 2-4.